Tire & Moose Bib Installation

Professional Tire & Moose Bib Installation

Flat tires end more rides in Utah than mechanical failures. Our rocky terrain, hidden cactus, and sharp shale demand a bulletproof setup. We’ll get you rolling with confidence.

Why Moose Bibs?

If you ride hard enduro in Utah without bibs, you’re gambling. Here’s why bibs make sense:

• Zero flats: Run 8 PSI over the gnarliest rocks
• Better traction: Low pressure = larger contact patch
• Long lasting: 1-2 years vs monthly tube replacements
• Remote ride confidence: No trail-side tube changes
• Cost effective: Pays for itself in 3-4 saved tubes

Tire Selection for Utah

Not all tires are created equal for our terrain:

Recommended Front Tires

• Michelin StarCross 5 Medium: Excellent all-around
• Dunlop AT81EX: Purpose-built for rocks
• Bridgestone M59: Excellent intermediate terrain
• Battlecross X31: Aggressive soft/intermediate compound
• Shinko 216 MX (90-100/21 soft): Excellent soft terrain grip

Recommended Rear Tires

• Michelin StarCross 5 Medium/Hard: Versatile performer
• Dunlop AT81EX: Maximum rock protection
• Metzeler 6 Days Extreme: When traction matters most
• IRC VE-33S: Superior extreme terrain grip
• IRC JX8: Excellent technical terrain performance
• Shinko R520DC: Superior traction in extreme conditions
• Shinko 216 MX: Great all-around soft terrain tire

The Installation Process

Professional Moose Bib Installation

We’ve installed thousands of bibs. Our process ensures:

1. Proper sizing: Wrong size bibs cause problems
2. Correct lubrication: Special lube prevents binding
3. Even seating: No high spots or pinching
4. Balanced installation: Prevents vibration
5. Spoke check: Critical with the added bib weight

Tire Mounting Excellence

Details matter when mounting tires:

• New rim strips on every install
• Spoke inspection and tensioning
• Bead seating verification
• Balance check for high-speed sections
• Proper torque on rim locks

Pressure Guidelines

With Tubes (Not Recommended):

• Front: 12-14 PSI minimum
• Rear: 11-13 PSI minimum

With Moose Bibs (Recommended):

• Front: 8-10 PSI
• Rear: 8-10 PSI
• Even lower for extreme traction

With Tubliss System:

• Front: 6-8 PSI
• Rear: 4-8 PSI
• Requires more maintenance

Utah-Specific Considerations

Our unique terrain demands special attention:

1. Sidewall Protection: Critical for our sharp rocks
2. Compound Selection: Harder compounds last longer
3. Tread Pattern: Open patterns shed our clay mud
4. Carcass Strength: Heavy-duty construction required

Service Package Deals

“Bombproof Setup” - Most Popular

• Front & rear Moose bibs
• Premium tire choice
• Wheel bearing inspection
• Spoke tension check
• 6-month flat guarantee: $380

“Race Ready”

• Your choice of pro-level tires
• Moose bibs front and rear
• Wheel truing
• New rim strips
• Sealed for maximum performance: $420

Pro Tips

1. Carry a pump: Even bibs need air adjustment
2. Check pressure often: Heat affects pressure
3. Inspect sidewalls: Utah rocks are tire killers
4. Rotate tires: Even wear extends life
5. Trust the bibs: Run low pressure for traction

Don’t let a flat tire ruin your epic ride. Our professional installation ensures you’re ready for whatever Utah throws at you.