Skip to main content
Home / Resources / Parts Compatibility Guide - KTM 300 XC-W & Husqvarna TE 300

Parts Compatibility Guide - KTM 300 XC-W & Husqvarna TE 300

Comprehensive parts compatibility guide showing which components interchange between KTM and Husqvarna 300cc 2-stroke models from 2019-2025.

Parts Compatibility Guide

Brand Interchangeability Overview

100% Interchangeable Parts

KTM 300 XC-W and Husqvarna TE 300 share the same:

  • Engine (complete)
  • Transmission
  • Clutch assembly
  • Suspension internals
  • Brake systems
  • Electrical components
  • Wheels and hubs

Brand-Specific Parts

Different between KTM and Husqvarna:

  • Plastics and graphics
  • Handlebars
  • Seats and covers
  • Radiator shrouds
  • Airbox covers
  • Fork guards (color)
  • Brake/clutch lever colors

Year-to-Year Compatibility

2019-2022 Compatibility Matrix

Component 2019 2020 2021 2022 Notes
Engine All parts interchange
Frame Identical geometry
Suspension ✓* ✓* *Updated valving only
Exhaust Same mounting
Plastics All cross-compatible
Electronics Same CDI/stator
Fuel System Mikuni TMX carb

2023-2025 TBI Model Changes

Component 2023 2024 2025 Backward Compatible
Engine Cases/internals only
Frame New Not with 2019-2022
Fuel System TBI TBI TBI Not with carb models
Electronics New Not with 2019-2022
Airbox New Not with 2019-2022
Plastics New Different mounting
Exhaust Fits all years

Engine Parts Compatibility

Bottom End Components

Crankshaft Assembly

  • 2019-2025: Same part number
  • KTM/Husky: 55430025100
  • Includes: Rod, bearings, pin
  • Stroke: 72mm all years

Cases

  • 2019-2022: 55430000144
  • 2023-2025: 55430000244
  • Not interchangeable between groups

Transmission

  • All years: 6-speed wide-ratio
  • All gears interchange 2019-2025
  • Same shift forks and drum

Top End Components

Cylinder

  • 2019-2025: 55430020100
  • Nikasil plated, 72mm bore
  • Power valve included
  • All years compatible

Power Valve System

  • 2019-2022: Mechanical
  • 2023-2025: Mechanical (same)
  • All parts interchange

Piston Kits

  • Same dimensions all years
  • 71.94-71.97mm (A-D sizes)
  • Single ring design

Suspension Compatibility

Fork Components

WP XACT 48mm

  • Springs: All years compatible
  • Cartridges: 2019-2025 same
  • Seals/bushings: Universal
  • Valving: Year-specific specs

External Parts

  • Triple clamps: All years fit
  • Fork guards: Universal
  • Axle: 26mm all years
  • Wheel spacers: Same

Shock Components

WP XACT Shock

  • Body: 2019-2025 identical
  • Shaft: 18mm all years
  • Springs: All compatible
  • Linkage: Same ratios

Mounting

  • Upper mount: Same all years
  • Lower mount: Same all years
  • Linkage bearings: Universal

Electrical System Compatibility

Ignition Components

2019-2022 Carbureted

Stator: 55439004000
CDI: 55439074000
Coil: 55431085000
Compatible within group only

2023-2025 TBI

Stator: 55439004100
ECU: 55439074100
Coil: 55431085000 (same)
Not backward compatible

Lighting Systems

All Years Compatible:

  • Headlight mounting
  • Tail light mounting
  • Turn signal connections
  • Horn (if equipped)
  • Switches (bars)

Fuel System Compatibility

Carbureted Models (2019-2022)

Mikuni TMX 38mm

  • Complete carb interchanges
  • All jets compatible
  • Same cable pull
  • Intake boot identical

Fuel Tank

  • 2019-2022: 9.0L capacity
  • Petcock: Same all years
  • Cap: Threaded type
  • Venting: Same routing

TBI Models (2023-2025)

Throttle Body

  • 39mm Keihin unit
  • Not compatible with carb
  • Requires different tank
  • ECU controlled

Fuel System

  • In-tank pump
  • Higher pressure system
  • Different fuel lines
  • Not backward compatible

Brake System Compatibility

Front Brake

All Years Use:

  • Brembo caliper
  • 260mm disc
  • Same master cylinder
  • DOT 5.1 fluid

Interchangeable Parts:

  • Pads: All years
  • Disc: All years
  • Lever: All years
  • Hose: All years

Rear Brake

All Years Use:

  • Brembo caliper
  • 220mm disc
  • Same pedal design
  • Spring return

Compatibility:

  • Complete system swaps
  • All parts interchange
  • Same mounting points

Wheels and Tires

Wheel Specifications

Front Wheel

  • 21” all years
  • 26mm axle
  • Same hub design
  • Spoke pattern identical

Rear Wheel

  • 18” all years
  • 20mm axle
  • Same hub width
  • Chain alignment same

Tire Compatibility

All Years Fit:

  • 90/90-21 front
  • 110/100-18 rear (stock)
  • 120/90-18 rear (option)
  • Same rim locks

Plastics Interchangeability

Within Year Groups

2019-2022 Plastics

  • All colors/brands swap
  • Same mounting points
  • Radiator shrouds vary by brand
  • Number plates universal

2023-2025 Plastics

  • New mounting system
  • Not compatible with older
  • All colors within group swap
  • Updated airbox cover

Aftermarket Options

Universal Fit:

  • Acerbis full kits
  • Polisport replacements
  • UFO plastic sets
  • Cycra powerflow kits

Common Swaps and Upgrades

Handlebars

  • KTM: Neken 999
  • Husky: ProTaper 997
  • Both fit either bike
  • Same control perches

Footpegs

  • Larger platform types
  • All brands compatible
  • Same mounting width
  • Spring pins identical

Exhaust Systems

  • FMF: All years fit
  • Pro Circuit: Universal
  • Akrapovic: Year-specific
  • Header pipe same

Performance Parts

Air Filters

  • Twin Air: All years
  • 2019-2022: Part 154215
  • 2023-2025: Part 154216FR
  • Different cage design

Clutch Upgrades

  • Rekluse: Year-specific
  • Hinson: All years fit
  • Barnett: Universal
  • Same stack height

What Doesn’t Interchange

Frame-Specific Items

2019-2022 vs 2023-2025:

  • Radiators (different tabs)
  • Fuel tanks (TBI vs carb)
  • Airbox assembly
  • CDI mounting bracket
  • Battery tray (if equipped)

Model-Specific Parts

KTM vs Husqvarna:

  • Seat (shape/color)
  • Graphics kits
  • Handlebar (bend)
  • Lever colors
  • Fork guard decals

Parts Sourcing Tips

Best Compatibility Years

Maximum Parts Availability:

  1. 2020-2022 models
  2. Most aftermarket support
  3. Proven reliability
  4. Parts still in production

TBI Considerations:

  1. Newer technology
  2. Limited used parts
  3. Dealer-only items
  4. Higher part costs

Cross-Shopping Strategy

Order of Search:

  1. Your exact year/model
  2. Same year group
  3. Other brand same year
  4. Aftermarket options
  5. Universal fit parts

Warranty Considerations

OEM Parts Usage

Same Brand Swap: No warranty impact Cross-Brand Swap: May void warranty Aftermarket Parts: Check dealer policy Used Parts: No warranty coverage

Summary Quick Reference

Always Compatible (2019-2025)

  • Engine internals
  • Brake components
  • Suspension internals
  • Wheels and hubs
  • Chain and sprockets
  • Exhaust systems

Year-Group Specific

  • Plastics and graphics
  • Fuel systems
  • Electronics
  • Frame components
  • Airbox assemblies

Brand-Specific Only

  • Seats
  • Handlebars
  • Color schemes
  • Graphics
  • Minor accessories

This guide ensures you can confidently source parts for your KTM 300 XC-W or Husqvarna TE 300, knowing exactly what will fit across years and brands.